Takeda Pharmaceutical Company Ltd. Instrumentation Technician II in Thousand Oaks, California
Under direct to minimal supervision, the instrument technician is responsible to maintain, calibration, troubleshoot and perform repairs on the Process Instrumentation systems. Prepare calibration reports. Understand the basic process and control theory of a Critical or Major system. Additionally, they will responsible for performing basic installation, troubleshooting, maintenance, repair, testing, and documentation/logs of a wide variety of office utility and facility equipment used in manufacturing, utility plants, analytical labs, and office areas. The technician will be responsible for completing various quality system and safety documentation. All work must be completed in a safe (in accordance to HRA, JHA, etc), timely manner according to planning and predefined schedules with minimal impact to production while complying with GMP, SOP, CFR and company regulations.
Essential Duties & Responsibilities:
Under general supervision, perform calibrations on Temperature, Pressure, Conductivity, UV, Balances, Scales, Vacuum, pH, CL2, ORP, Timers, RPM, Liquid/Gas Flow, and Gas detector instrumentation
Performs breakdown and preventive maintenance of critical plant/utility equipment and instruments.
Has technical understanding and troubleshooting skills of electrical and pneumatic instrumentation.
Support and may be responsible for repairing manufacturing equipment and building components; doors, wetted fire system, lighting, mechanical and electrical equipment as assigned.
Will provide basic troubleshooting, diagnostic, and repair of equipment and equipment components related to positional responsibilities.
Perform installation and modifications, or work together with Engineering, Maintenance, Process Control, or outside contractors on new installations and modifications.
Operate, Maintain, and repair of calibration test equipment.
Must follow safety rules and ensure compliance with CA state and federal EPA regulation and laws. Specific responsible system repairs, upkeep, maintenance and operations managed within regulating agencies such as CAL OSHA and OSHA.
Understand Automated Control systems and control system instrumentation concepts, and the relationship between each other.
Initiate corrective action to ensure potentially hazard situations are avoided and safety standards are maintained relative to production or facilities.
Prepare and maintain accurate records and reports per Standard Operating Procedures. Is responsible for performing instrumentation calibrations under the Metrology program.
Ability to read and interpret Loop, P&ID, Wire, and Electrical drawings.
Ability to spec out like for like or like for function instrumentation, to meet manufacturing process requirements.
Verify Out of Tolerance Conditions
Assist with the review of the System Specification and Piping Identification Drawing verifications.
Successfully interface with customers, as necessary.
Ensure proper execution, resource allocation and complete, accurate and timely documentation of work
May perform other duties as assigned.
High school diploma or equivalent.
Skilled craft training/apprenticeship certificate or commensurate combination of technical education and experience.
2-5 years in Process Instrumentation/Calibration/maintenance (May include education).
Experience in pharmaceutical manufacturing environment or equivalent industry desired.
2 year technical/AA/AS degree in metrology, instrumentation, electronics, or related technical discipline.
Must be able to work independently and make sound judgments regarding work methods and tools.
Must be able to read wiring diagrams, loop drawings and P&ID drawings
Must have the ability to correctly complete high school-level mathematics.
Incumbent must be proficient in a variety of mathematical disciplines and be able to work with both the metric and USA standards of measurement.
Must be able to read, write, and converse in English.
Must be able to read and follow detailed written instructions and have good verbal/written communication skills.
Good computer skills, knowledge of Microsoft Word and Excel.
Good interpersonal skills and be able to work effectively and efficiently in a team environment.
Passion for Improving Lives. Must be able to put our patients at the center of everything we do.
Quest for Innovation. Must be able to operate with agility and a learning mindset so that we can accelerate breakthrough innovations.
Inspired Teams environment.
Must be able to thrive in diverse high performing teams.
Engaged with the World Around Us. Must be able to embrace change and seek diverse perspectives and partnerships to benefit patients and make a positive impact on the world.
Must be able to work in controlled environments requiring special gowning. Will be required to follow gowning requirements and wear protective clothing over the head, face, hands, feet and body. Additionally, personal protective equipment must be worn due to safety requirements.
The incumbent must work in a clean room environment wearing special garments.
Will work in a cold, wet environment and hot humid environments both inside and outside of facility.
Will work around chemicals such as paint, flooring materials, refrigerants, alcohol, acids, buffers that may require respiratory protection.
Must be able to work 8-12 hour day or night shifts and overtime, weekend work, and or holidays
The overall physical exertion of this position requires medium to heavy work. Times are continuous and may occur multiple times per day.
The overall physical exertion of this position is medium work.
May be required to lift up to 50 pounds when calibrating scales, and replacing pumps on Autoclaves.
May be required to (rarely) push up to 450 pounds when calibrating scales.
May be required to (rarely) up to 450 pounds when calibrating scales.
May be required to sit between 1-2 hours.
May be required to walk between 3-4 hours.
May be required to stand over 4 hours.
May be required to bend at the neck up to 1 hour.
May be required to bend at the waist up to 1 hour.
May be required to squat up to 1 hour.
May be required to climb up to 1 hour.
May be required to reach above/below the shoulder up to 1 hour.
May be required to kneel up to 1 hour.
May be required to twist at the neck/waist up to 1 hour.
May be required to lift up to 75lbs. Lifts per shift are up to 2 to 20 times.
May be required to carry up to 50lbs. Carry distance of between 10 to 200ft.
Requires repetitive use of both right and left hands and arms up to 1 hour.
May require simple grasping with hands/arms between 3-4 hours.
May require power grasping with hands/arms between 1-2 hours.
May require fine manipulation with hands/arms up to 1 hour.
May require pushing/pulling with hands/arms between 1-2 hours.
May require office work activities with hands/arms between 1-2 hours.
May be required to gown frequently and balance when gowning into clean areas.
May be exposed to noise above 85 dBA. This may require hearing protection and other protective equipment to be worn.
May be required to walk on uneven ground.
May require operation of foot controls or repetitive foot movement.
Notice to Employment / Recruitment Agents:
Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from Shire, a wholly-owned subsidiary of Takeda’s Talent Acquisition department. Any agency candidate submission may only be submitted to positions opened to the agency through the specific Agency Portal. Shire, a wholly-owned subsidiary of Takeda will only pay a fee for candidates submitted or presented where there is a fully executed contract in place between the Employment / Recruitment agents and Shire, a wholly-owned subsidiary of Takeda and only if the candidate is submitted via the Agency Portal. Candidates submitted or presented by Employment / Recruitment Agents without a fully executed contract or submitted through this site shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.
Equal Employment Opportunity
Shire, a wholly-owned subsidiary of Takeda, is an Equal Opportunity Employer committed to a diverse workforce. Shire, a wholly-owned subsidiary of Takeda, will not discriminate against any worker or job applicant on the basis of race, color, religion, gender, national origin, ancestry, age, sexual orientation, marital or civil partnership status, pregnancy, gender reassignment, non-job related mental or physical disability, genetic information, veteran status, military service, application for military service, or membership in any other category protected under law.
EEO is the Law - https://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf
EEO is the Law – Supplement - https://www.dol.gov/ofccp/regs/compliance/posters/pdf/OFCCPEEOSupplementFinalJRFQA508c.pdf
Pay Transparency Policy - https://www.dol.gov/ofccp/pdf/pay-transp_formattedESQA508c.pdf
Shire, a wholly-owned subsidiary of Takeda, is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please call 484-595-8400 and let us know the nature of your request and your contact information.
Takeda is an industry-leading, global pharmaceutical company with an unwavering dedication to putting patients at the center of everything we do. We live our values of Takeda-ism – Integrity, Fairness, Honesty, and Perseverance – and are united by our mission to strive towards Better Health and a Brighter Future for people worldwide through leading innovation in medicine. Here, everyone matters and you will be a vital contributor to our inspiring, bold mission. At Takeda, you will make an impact on people’s lives – including your own.